Index of /Manuals/HKS EVC HKS EVC IV · HKS EVC IV · HKS EVC V · HKS EVC V Set · HKS EVC VI HKS Website: Turbo, Supercharger, Suspension(HIPERMAX), Intake, Electronics (VAC, EVC, Flash Editor, DMR, etc.), Engine, Oil, Power train, Brake, and many. HKS released “EVC-S” from the EVC product series for price-conscious customers. Each unit is compact and easy to install in the engine bay and the interior.
|Published (Last):||6 April 2012|
|PDF File Size:||14.33 Mb|
|ePub File Size:||11.6 Mb|
|Price:||Free* [*Free Regsitration Required]|
The side of the buttons can be switched by flipping the monitor vertically. This function protects the engine and turbocharger from excessive boost. Return Function The boost setting returns to the factory setting when the power is turned off. If the boost exceeds the warning value, an audible beep and visible warning display notify the user.
This function can be turned off. Appearance of the display unit was designed to match well with other HKS electronics parts. Thin display unit enables free layout. Each unit is compact and easy to install in the engine bay and the interior.
On some vehicles, the boost value may be lower than the boost before installing the EVC-S. Data Memory Function Each setting value is saved in the internal memory; the saved values are retrievable even after the ignition is shut-off or the battery is vo. Data Lock Function The setting data can be protected by a password to prevent unwanted or accidental changes.
This EVC-S utilizes the solenoid valve. Junction connection evvc that connects the display unit, solenoid valve, and boost sensor to the control unit is utilized for simple installation.
Boost pressure setting returns to stock pressure evd when the unit is off. The differences between the boost pressure set value and actual value can be offset in 3 different modes. Select the type of a bar graph from the boost pressure, throttle angle, engine RPM and vehicle speed.
The boost pressure can be increased by a designated value above the set value. Since the Boost Sensor is independent, hose routing does not need to run into the vehicles interior.
Boost pressure can be set in 3 different modes to use them for different mqnual. Select appropriate exhaust bypass type from swing valve type or poppet valve type. The maximum positive boost value is displayed for 3 seconds when the boost changes from positive pressure to negative pressure. Monitor Manuual System easily leads the user to the correct setting and logging screens.
After Image Display Function When the boost rvc from positive pressure to negative pressure, the maximum boost under positive pressure can be displayed for 3 seconds. Select the display unit’s brightness from 2 levels.
EVC-S | ELECTRONICS | PRODUCT | HKS
The boost manuaal will be lowered to the set value. Data can be locked with a password; it prevents data loss or inadvertent data changes. More precise correction is possible for modern smaller sized turbo.
The bar graph displays the maximum value after it is reached. Unified design for whole HKS electronics products.
Also, the boost is lowered to the stock value or a preset value to prevents damage to the engine. Input of the throttle signal and ci RPM or vehicle speed signals enables the boost control by a 3D map using 2 these signals as axes.
Throttle position sensor signal input enables the boost control with the throttle angle. Select the unit from kPa or PSI. All settings are stored in the internal memory; so settings will not be lost even when the ignition is off or the battery is disconnected. It can achieve easy instant recognition.
The proven Stepping Motor is utilized as a valve unit. Redesigning the color pattern of the main display improved the visibility during driving.
Index of /Manuals/HKS EVC
Warning Function If the boost level exceeds the warning value, the unit will warn the user will an audible buzzer and visually on the display. This ensures more precise setting. It works for both internal and external wastegate types.