SDS, Language, Regulatory Body, Download. Intergard Light Grey Part A, English, United Kingdom, PDF. Intergard Light Grey Part A, English, United. Intergard 36 hrs. 42 days. 18 hrs. 35 days. 8 hrs. 28 days. 5 hrs. 14 days. Interspeed Ultra. 24 hrs. 8 days. 15 hrs. 6 days. 8 hrs. 5 days. A two pack, tar free, epoxy tie coat for use between anticorrosives and either antifoulings or cosmetic finishes to ensure maximum system adhesion and.
|Published (Last):||23 March 2017|
|PDF File Size:||1.76 Mb|
|ePub File Size:||12.48 Mb|
|Price:||Free* [*Free Regsitration Required]|
Intergrad NOT thin more than allowed by local environmental legislation. Subject to re-inspection thereafter. Intergard should be used in accordance with the specification given by International Paint. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
SML Marine Paints – Intergard by International is comparable to Safeguard Universal ES
VOC values are typical and are provided for guidance purposes only. Feathered overlap areas must be kept to a minimum. Consult your International Paint representative for the system best suited for the surfaces to be protected. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units. Safeguard Universal ES may not be an exact match for Intergard by International but we have given the closest match we can.
For application in Korea including extended intervals with Interthaneconsult your International Paint representative.
Thank you for the exemplary service, the paint tins were so intergatd packed, and the surprise Document Pack, was very helpful. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Export Data and Price of paint intergard | Zauba
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Close There are no items in your basket. All surfaces to be coated should be clean, dry and free from contamination. My Basket Log in. Intersleek may only be applied over Intergard in Korea.
Safeguard Universal ES Safeguard Universal ES is a two-component epoxy-vinyl coating that is ideal for ontergard as a primer before the application of Jotun antifouling. Please see any notes to see any major differences and call us on if you have any specific questions.
Multiple coats may be required to achieve specified film thickness. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
Consult your International Paint representative for specific recommendations. Advice We only sell jntergard we know about and believe in. Order in the next 22 hours 46 minutes for dispatch Wednesday.
What our customers say View more. Apply in good weather. The primer surface should be dry and free of all contamination oil, grease, salt etc. Take intertard to avoid skin and eye contact ie.
Intergard 263 Epoxy Primer /Tiecoat 5 litres International
Use the form below or send an email to Name 236 Email Intsrgard Your privacy We will only use this information to process your enquiry. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
Substrates not suitable for upgrading: In the event welding or flame cutting is performed on metal integgard with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. Material is supplied in 2 containers as a unit. Consult your local International Paint representative for specific recommendations. Consult your International Paint representative for details.
Always mix a complete unit in the proportions supplied. However, we may contact you, no more than twice a year, to ask about any paint requirements please select how you would like to be contacted:. Actual safety measures are dependant on application methods and work environment. Intergard should only be infergard over epoxy anticorrosive primers.
For advice or sales call Use the form below or send an email to Name. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Do intergwrd exceed pot life limitations. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.